EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) 3831109826058 EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/14mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems. It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage. Specifications: Material: Extruded acrylic Inner diameter: 10 mm Outer diameter: 14 mm Total length: 800 mm Bend Angle: 90° Bend Radius: R25 Length per axis: 550x250mm